Plumber in Heritage Springs.

Bigger homes, more to look after.

A typical Heritage Springs home has two or three bathrooms, an ensuite, a kitchen and laundry, and several gas appliances. That is a lot more tapware, toilets, waste lines and connections than a small block - and more of it failing at once now the estate is 15-20 years old. We are happy to work through a list of jobs in a single visit to save you repeat call-out fees.

Slab leaks.

Heritage Springs homes are concrete-slab built with pipework run within or under the slab. After two decades a pinhole or joint failure under the slab shows up as a warm floor patch and a creeping water bill. We use electronic and thermal leak detection to pinpoint the exact spot before opening anything - worked example, a slab leak under the lounge usually costs around $900 to detect, expose, repair and reinstate, rather than ripping up a whole floor on guesswork.

Twin & large hot water systems.

Larger Heritage Springs homes often run a bigger or even a second hot water unit to serve multiple bathrooms. As the originals hit the 10-15 year window we replace them - including upsizing or moving to continuous-flow gas or a heat pump where it suits the household. See hot water systems.

Gas appliances & CO testing.

With several gas appliances per home, gas fitting is regular work here - cooktop and heater connections, new gas points, and carbon-monoxide testing on ageing ducted and space heaters that can develop cracked heat exchangers. Every gas job is done to AS/NZS 5601 with a Certificate of Compliance.

Typical Heritage Springs jobs.

• Slab-leak detection & repair - ~$600-$1,200
• Twin or upsized hot water replacement - ~$1,400-$3,200
• Multi-bathroom tapware, mixer and toilet renewals
• Blocked drains from maturing garden trees
• Gas appliance connections and CO testing